SFPH鉆井液用硅氟抗高溫高壓降濾失劑為黑色粉末，該產品是由苯酚、甲醛、硝基腐植酸和硅氟聚合物等在一定條件下接枝共聚而成，由于SFPH降濾失劑分子上引入抗高溫、抗鹽基團，顯著增加了其抗溫、抗鹽性能，抗溫可達200℃，適用于高溫深井泥漿體系，能顯著地降低淡水、飽和鹽水鉆井液的失水量，且明顯改善泥餅質量和鉆井液的流變性。

一、產品特性

1、抗溫能力強，具有很好的降失水性能和廣泛的抗污染能力。

2、粘度效應低，鉆井液具有好的流變性。

3、可與各種鉆井液體系配合使用，配伍性好。建議加量1～3 %。

二、性能指標

三、包裝、運輸及儲存

包裝袋為紙塑三合一包裝袋，頂口縫合后用膠帶粘結，每袋凈重25（±0.5）kg。

本品不燃、不爆、沒毒、無害，按非危險品運輸管理。

產品在儲存過程中應注意防潮、防漏。有效期兩年。

   本品避免與眼睛接觸，否則用大量清水清洗。

SFPH High Temperature and High Pressure Fluid Loss Reducer with Silicon Fluoride for Drilling Fluid

Product Details

SFPH filtrate reducer for drilling fluid is black powder. The product is made of phenol, formaldehyde, NITROHUMIC acid and silicofluoropolymer by graft copolymerization under certain conditions. Due to the introduction of high temperature resistant and salt resistant groups into SFPH filtrate reducer, its temperature resistance and salt resistance are significantly increased. The temperature resistance can reach 200 ℃, which is suitable for high temperature and deep well mud system, It can significantly reduce the water loss of fresh water and saturated brine drilling fluid, and significantly improve the quality of mud cake and rheological properties of drilling fluid.

Product Features

1. Strong temperature resistance, good water loss reduction performance and extensive anti pollution ability.

2. The viscosity effect is low and the drilling fluid has good rheology.

3. It can be used with various drilling fluid systems with good compatibility. The recommended dosage is 1-3%.

Performance Index

Packaging, Transportation and Storage

The packaging bag is a paper plastic three in one packaging bag. The top opening is sewn and bonded with adhesive tape. The net weight of each bag is 25 (± 0.5) kg.

This product is non combustible, non explosive, non-toxic and harmless, and is managed as non dangerous goods transportation.

The products should be protected from moisture and leakage during storage. It is valid for two years.

Avoid contact with eyes, or wash with plenty of water.